OutputUCS1903Uart.hpp

Go to the documentation of this file.

#pragma once
/*
* OutputUCS1903Uart.h - UCS1903 driver code for ESPixelStick UART
*
* Project: ESPixelStick - An ESP8266 / ESP32 and E1.31 based pixel driver
* Copyright (c) 2015, 2022 Shelby Merrick
* http://www.forkineye.com
*
*  This program is provided free for you to use in any way that you wish,
*  subject to the laws and regulations where you are using it.  Due diligence
*  is strongly suggested before using this code.  Please give credit where due.
*
*  The Author makes no warranty of any kind, express or implied, with regard
*  to this program or the documentation contained in this document.  The
*  Author shall not be liable in any event for incidental or consequential
*  damages in connection with, or arising out of, the furnishing, performance
*  or use of these programs.
*
*   This is a derived class that converts data in the output buffer into
*   pixel intensities and then transmits them through the configured serial
*   interface.
*
*/
 
#if defined(SUPPORT_OutputProtocol_UCS1903) && defined(SUPPORT_UART)
#include "OutputCommon.hpp"
 
#include "OutputUCS1903.hpp"
#include "OutputUart.hpp"
 
class c_OutputUCS1903Uart : public c_OutputUCS1903
{
public:
    // These functions are inherited from c_OutputCommon
    c_OutputUCS1903Uart (OM_OutputPortDefinition_t & OutputPortDefinition,
                         c_OutputMgr::e_OutputProtocolType outputType);
    virtual ~c_OutputUCS1903Uart ();
 
    // functions to be provided by the derived class
    void    Begin ();                                         
    uint32_t Poll ();                                        
    void    PauseOutput (bool State);
    bool    SetConfig (ArduinoJson::JsonObject& jsonConfig);
    void    GetConfig (ArduinoJson::JsonObject& jsonConfig);
    void    GetStatus (ArduinoJson::JsonObject& jsonStatus);
 
#define UCS1903_NUM_DATA_BYTES_PER_INTENSITY_BYTE    4
 
private:
    bool validate ();        
    c_OutputUart Uart;
 
}; // c_OutputUCS1903Uart
 
#endif // defined(SUPPORT_OutputProtocol_UCS1903) && defined(SUPPORT_UART)